News

In Mold Coating is a coating used on the surface of plastic products. It has good wear resistance, scratch resistance and chemical corrosion resistance. Here are a few key points for purchasing: Selection: Select the appropriate material model and specifications according to the required applicat......

The general process for using PU paint is as follows: Surface Preparation: Make sure the surface to be coated is clean, flat and free of oil, dust or other impurities. You can use sandpaper or emery cloth to smooth the surface so that the paint will adhere better.

The stability of PU pigments is affected by many factors, including the following aspects: Light: It is easily affected by light, especially ultraviolet rays, which can cause it to lose stability. Therefore, pigments need to be protected from prolonged exposure to sunlight and UV rays during produc......

Blended Polyol is a material made from a blend of different types of polyols. It has the following characteristics: Versatility: The proportions and types of polyols can be adjusted as needed to achieve the desired performance and characteristics. This makes it versatile in a variety of application......

Slow Rebound Foam Opening Agent is an additive used in the production of slow rebound foam products (such as memory foam pillows, mattresses, etc.). The following are the precautions for its use: SAFE HANDLING: Wear appropriate protective equipment such as gloves, mask, and goggles to avoid c......